Toshiba MA-1595-1 owner manual Listing Capacity Open, Selective Itemizer SI Status Modification

10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11152

10.33 Listing Capacity Open

Tare Weight [TARE 3]

Any value other than 0, however, less than the weight of scaled item

Tare 2 Rate [TARE 2]	to be continued to the arrows
0 to 99.99 (%)	marked with “(M)” in the above
	three operation sequences of the
	Auto Scale Entry.

NOTES: 1. If the Tare 2 rate is programmed in the PLU table, a PLU entry using Tare 2 Rate [TARE 2] (third pattern above) cannot be performed.

2.The [TARE 3] key cannot be used together with the [TARE] key.

3.Omission of the Tare 3 Entry causes an error if the compulsory status of the Tare 3 Entry has been programmed to a department/PLU item to be entered.

(3)Manual Scale Entry (It may be prohibited by a program option.)

Net Weight of the item [SCALE]

1 to 99999

(unit: g or 1/100LB. For example, enter 5 for 0.05 LB.)

to be continued to the arrows marked with “(M)” in the above three operation sequences of the Auto Scale Entry.

(4) Return or Void Manual Scale Entry (It may be prohibited by a program option.)

[RTN MDSE] for Return

[VOID] for Void

to be continued to the top of the “Manual Scale Entry” sequence above.

10.33 Listing Capacity Open

For Departments and PLUs

Depress [LC OPEN] (or [OPEN]) prior to or any time during an entry of an open-department, open-PLU, or preset-open department or PLU sequence (including REPEAT and QUANTITY EXTENSION entries). Please note that the [LC OPEN] or [OPEN] key must be pressed, at latest, before the final key of the entry sequence. The High Amount Limit for the department or PLU will be extended with two higher digits, and the Low Amount Limit will be extended with one lower digit. For entering an amount still exceeding these limits, you must call for a Manager Intervention.

For Media Tender Amounts

Depress [LC OPEN] (or [OPEN]) before or after the amount but Media Key. The High Amount Limit for the media tendering will be extended with one higher digit. In need of still exceeding this limit, you must call for a Manager Intervention.

For Amounts through [DOLL DISC], [VND CPN], [STR CPN], [BTL RTN]

To exceed their limits, you must always call for a Manager Intervention. The [LC OPEN] or [OPEN] key will not be effective. As for the [STR CPN] key only, the amount is limited by both High Amount Limit of the department through which the store coupon amount is entered and the amount limit for [STR CPN]. That is, when an amount cannot be entered using [LC OPEN] or [OPEN], you must call for a Manager Intervention.

10.34 Selective Itemizer (SI) Status Modification

Depress [SI/M] (or [SI1/M] and/or [SI2/M]) for entering the required Department or PLU item, the same way as [LC OPEN] is operated for Departments and PLUs. The SI-net status is reversed to non-net status, and vice versa.

10-22