Toshiba RAV-SM2802DT-E, RAV-SM2242DT-TR 105, Part name, Work procedure, Remarks, <Fan motor>

No.	Part name	Work procedure		Remarks
1	Fan	<Fan motor>
	assembly	1) Take off screws (Arrow mark indicating	1)
	(Continued)	position) of the tightening band and then
		remove the tightening band, the fixing bracket
		and the fan motor.

2)Cut the bundling band (2 positions) that fix the protective tube (white) on the relay connector of the fan motor.

3)Remove the fan motor lead wire assembly and the protective tube from lead wire of the fan motor.

4)Mount the fan motor lead wire assembly and

the protective tube to the fan motor to be	1)
replaced, arrange the tube so that it covers the
relay connector and then fix it with bundling
band (2 positions).
5) Put the fan motor to be replaced on the motor
base.
Set the fan motor so that label of the model
name is at upper side when replaced.	Tightening band
	(Ø4: 1 position for left/right each)

∗After replacement, assemble the fan motor in reverse order so that it becomes the same

status as that before replacement.	2), 3)	Relay connector
Be careful there is no loosening of screws
	Protective tube		Fan motor lead wire
when assembling.
Check also that there is no fitting of fan with
fan case, no air discharge and no abnormal
sound
	Fan motor lead
	wire assembly
	Fix the both ends of the
	protective tube so that it
	covers the relay connector section.
Fan motor	4)

5)

Fan motor model name label

Motor base	Fixing bracket	Tightening band
		(Left): 2 pcs.
		(Right): 2 pcs.

– 105 –