Toshiba RAV-SM2802DT-E, RAV-SM2242DT-TR 57, Function selection item No. DN list, Item, Contents

Function selection item No. (DN) list

DN	Item		Contents		At shipment from factory
		0000:None		0001: 150H
01	Filter sign lighting time	0002:2500H		0003: 5000H	According to type
		0004:10000H		0005: Clogging sensor used
03	Central control address	0001:No.1 unit	to	0064: No.64 unit	0099:Undecided
		0099:Undecided
		0000:No shift		0001: +1°C	0002:+2°C
06	Heating suction temp. shift	0002:+2°C	to	0010: +10°C
					(Floor type 0000: 0°C)
				(Up to +6 is recommended.)
10	Type	0000:(1-way air discharge cassette)			According to model type
		0001:(4-way air discharge cassette) to 0038
11	Indoor unit capacity	0000:Undecided		0001 to 0034	According to capacity type
12	Line address	0001:No.1 unit	to	0030: No.30 unit	0099:Undecided
13	Indoor unit address	0001:No.1 unit	to	0064: No.64 unit	0099:Undecided
14	Group address	0000:Individual		0001: Master unit in group	0099:Undecided
		0002:Follower unit in group
	In automatic cooling/heating, temp.	0000:0 deg	to	0020: 20 deg
1E	width of cool → heat, heat →	(Cool/heat are reversed with ± (Data value) /			0003:3 deg (Ts±1.5)
	cool mode selection control point	2 against the set temperature)
28	Automatic reset of power failure	0000:None		0001: Provided	0000:None
	Selection of option / error input	0000:Filter input
2A		0001:Alarm input (Air cleaner, etc.)			0002:Humidifier
	(CN70)
		0002:Humidifier input
2b	Selection of thermostat output	0000:Indoor thermostat ON			0000:Thermostat ON
	(T10 ƒ )	0001:ON receiving output of outdoor compressor
31	Fan (Single operation)	0000:Impossible		0001: Possible	0000:Impossible
32	Sensor selection	0000: Body TA sensor			0000:Body sensor
		0001: Remote controller sensor
		0000:No control
40	Humidifier control	0001:Humidifier + Vaporizing type (Pump ON)			0003:Humidifier ON
	(+Drain pump control)	0002:Humidifier + Supersonic type
					Pump OFF
	(This function is not provided.)	(Pump ON when specified time elapsed)
		0003:Humidifier + Natural drain type (Pump OFF)
60	Timer setting	0000:Operable			0000:Operable
	(Wired remote controller)	0001:Operation prohibited
C2	Current demand X% to outdoor unit	0050:50%	to	0100: 100%	0075:75%
D0	Existence of remote controller save	0000:Invalid (Impossible)		0001: Valid (Possible)	0001:Valid (Possible)
	function

∗Restriction ratio setting for save operation (DN code No. [C2]) can be set/changed from the normal DN setup (Detail DN setup).

– 57 –