Hardware and system checklist
USB
Refer also to your USB device’s documentation.
Problem | Procedure |
USB device does | Check for a firm cable connection between the |
not work | USB ports on the computer and the USB device. |
|
|
| Make sure the USB device drivers are properly |
| installed. Refer to your Windows XP documenta- |
| tion for information on checking the drivers. |
| If problems persist, contact your dealer. |
Memory expansion
Refer also to Chapter 8, Optional Devices, for information on installing memory modules.
Problem | Procedure | |
The following message | Make sure the memory module installed in the | |
is displayed on the | expansion slot is compatible with the computer. | |
Sub LCD: | If an incompatible module has been installed, | |
MEM0 ERROR | follow the steps below. | |
or | 1. | Disconnect the universal AC adaptor and all |
MEM1 ERROR |
| peripheral devices |
| 2. | Remove the battery. |
| 3. | Remove the memory module. |
| 4. | Replace the battery and/or connect the |
|
| universal AC adaptor. |
| 5. | Turn on the power. |
If problems persist, contact your dealer.
ROUBLESHOOTINGT
