Turning off the power
Starting Hibernation
NOTE: You can also enable Hibernation by pressing Fn + F4. See Chapter 5, Keyboard, for details.
To enter Hibernation mode, follow the steps below.
1.Click start.
2.Select Turn Off Computer.
3.Open the Turn Off Computer dialog box. Hibernate is not displayed.
4.Press the Shift key. The Standby item will change to Hibernate.
5.Select the Hibernate.
Automatic Hibernation
The computer will enter Hibernate mode automatically when you press the power button or close the lid. First, however, make the appropriate settings according to the steps below.
1.Open the Control Panel.
2.In Windows XP, open Performance and Maintenance and open TOSHIBA Power Saver.
3.Select the Hibernate window, select the Enable Hibernate support check box and click the Apply button.
4.Select the Power Save Modes window.
5.
6.Enable the desired Hibernation settings for When I press the power button and When I close the lid.
7.Click the OK button.
Data save in hibernation mode
When you turn off the power in hibernation mode, the computer takes a moment to save current memory data to the hard disk. During this time, the Disk indicator will light.
After you turn off the computer and memory is saved to the hard disk, turn off the power to any peripheral devices.
GETTING
STARTED
