Writing CD/DVDs on DVD Multi drive
❑Data written to a
❑Data deleted (erase) from a
❑In writing to a
❑Since the disc is based on the DVD standard, it will be filled with dummy data if the written data is less than about 1 GB. Even if you write only a small amount of data, it will take time to fill in the dummy data.
❑Two types of
❑
Before writing or rewriting
Please observe the following points when you write or rewrite data.
❑When multiple drives that can write data to discs are connected, be careful not to write to the wrong drive.
❑Be sure to connect the universal AC adaptor before you write or rewrite.
❑Before you enter standby/hibernation mode, be sure to finish
❑Be sure to close all other software programs except the writing software.
❑Do not run software such as a screen saver, which can put a heavy load on the CPU.
❑Operate the computer in the
❑Do not write while virus check software is running. Wait for it to finish, then disable virus detection programs including any software that checks files automatically in the background.
❑Do not use hard disk utilities, including those intended to enhance HDD access speed. They may cause unstable operation and data damage.
❑Write from the computer's HDD to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device.
PERATINGO
BASICS
