![](/images/new-backgrounds/1266389/266389193x1.webp)
Cleaning the computer
3.Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub.
NOTE: When the computer is exchanging data with the LAN, the LAN Active indicator glows yellow. When the computer is connected to a LAN hub but is not exchanging data, the Link indicator glows green.
Disconnecting LAN cable
To disconnect the LAN cable, follow the steps below.
CAUTION: Make sure the LAN Active indicator (yellow LED) is out before you disconnect the computer from the LAN.
1.Pinch the lever on the connector in the computer’s LAN jack and pull out the connector.
2.Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub.
Cleaning the computer
To help ensure long,
❑Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again.
❑Clean the computer using a slightly damp (with water) cloth. You can use glass cleaner on the display. Spray a small amount of cleaner on a soft, clean cloth and wipe the screen gently with the cloth.
CAUTION: Never spray cleaner directly onto the computer or let liquid run into any part of it. Never use harsh or caustic chemical products to clean the computer.
❑Remove the dust from the air filter on the underside of the computer regularly with vacuum cleaner. See Chapter 2 Grand Tour, Underside.
PERATINGO
BASICS