Vertical Communications 8012S manual To retrieve a call that you parked using the paging option

iPrimo Speakerphone Station User’s Guide

•To transfer a call to a pager park orbit for retrieval and transmit the call’s park orbit code and caller ID information (if available),

1.Answer the call and select Transfer.

2.Dial an extension number.

3.If the called station does not answer or is busy, select

TRACK.

4.Hear the confirmation beep (page accepted) or hear a busy tone (page not accepted).

5.Press the SPEAKER button to end.

Note: Parked pager calls will recall to your station after a pre programmed time-out. You can either place the call into another page orbit or retrieve the call.

•To retrieve a call that you parked using the paging option,

1.Press the HOLD button to scroll your held calls, (display shows PAGE and extension number of each parked call).

2.Press TAP to retrieve the displayed parked call.

•If you receive a parked call message on your pager unit,

1.Go to any system station.

2.Press INTERCOM.

3.Dial the pager orbit code (#800 to #899).

4.Retreive the call.

•To enable or disable a pager unit at your station,

1.Press INTERCOM.

2.Dial #07 to enable, or dial #06 to disable.

3.Press SPEAKER to end.

October, 02 Comdial 93