Note: Pressing any button (mute, hold, etc.) on the speaker- phone while in full-duplex mode causes the system to perform the “speech training” test again. For example, if you press MUTE while in full-duplex mode, when you release the call from mute, the system will perform the entire “speech train- ing” test.

To maximize the usefulness of your full-duplex speakerphone, take note of these following observations about full-duplex speakerphone operation.

The full duplex operating mode requires a small amount of time to adapt to changes in echo; therefore, you should avoid making any movements in the vicinity—about a one-foot radius—of the speakerphone.

There are certain echo limits beyond which the speakerphone cannot effect canceling. These limits are as follows: room echoes beyond 39 milliseconds (standard configuration) and line echoes beyond 24 milliseconds (standard configuration).

The speakerphone may automatically reduce the volume in each direction when both you and the distant party talk at the same time (double-talk). This volume reduction is necessary to control the echoes at high volume levels. It is possible for surrounding conversations and other sounds to trigger double- talk even when you are not speaking. This condition may lower the loudspeaker volume at your speakerphone.

You must adjust the loudness of your voice to match that of the distant party’s voice. This action is necessary to cause full- duplex operation to take place. Sustained double-talk or excessive echo may cause the speakerphone to drop back into half-duplex operation. This happens because the speakerphone’s echo cancel circuits cannot adapt during the double-talk situation.

132

Comdial

October, 02

Page 142
Image 142
Vertical Communications 8012S manual Comdial October