Vertical Communications 8012S manual Call Parking, Parking a Call, Handling Park Recalls

iPrimo Speakerphone Station User’s Guide

4.4 Call Parking

4.4.1 PARKING A CALL

You can place an intercom or outside call on hold in the system so that it can be answered from any station, even though it may not have a line appearance for the call. You accomplish this by plac- ing the call in one of many park orbits, where the call remains until it is answered.

•To park a call in orbit,

1.While on an outside call, press INTERCOM and dial * or press TRNS/CONF if intercom call.

2.Dial the code for park orbit (910-999 for orbit 10-99).

3.Remember the code for later use or make it known to those who need to know it in order to retrieve the call.

•To park a call using a programmed PARK button,

—While on the call, press the programmed Park button (the system places the call in a preselected park orbit and lights the PARK light).

•To retrieve a call that was placed on hold in the system (parked)

1.Press INTERCOM.

2.Dial #

3.Dial the code for the orbit (910-999 for orbit 10-99), or press the programmed PARK button.

4.4.2 HANDLING PARK RECALLS

When a parked call times out of the system, it returns to your tele- phone in the form of a park recall (you hear four short tone bursts at 12 second intervals).

October, 02 Comdial 53