Vertical Communications 8012S manual Setting Volume Levels, To Set The Ringer Loudness Level

Getting Started

1.6 Setting Volume Levels

The volume control on your telephone is a multipurpose control you can use to set the volume (loudness) of the ringer, the speaker, and the handset. There are four ringer loudness levels (plus an off position).

•To Set The Ringer Loudness Level,

1.While your telephone is on-hook and idle, press the VOL- UME UP or VOLUME DOWN button once for each change in loudness you desire. The ringer sounds once for each change as an example of the current setting.

2.SELECT SAVE to end.

NOTE: If you set the ringer to the OFF position, your tele- phone sounds a short ring burst once for each call you receive at your station.

•To Set The Speaker And Handset Loudness Levels,

1.Press the INTERCOM button.

2.Press the VOLUME UP or VOLUME DOWN button once for each change in speaker volume that you desire.

3.Select SAVE.

4.Lift the handset.

5.Press the VOLUME UP or VOLUME DOWN button once for each change in handset volume that you desire.

6.Select SAVE.

NOTE: When a call ends, the system resets the speaker and handset volume of all future calls to the programmed setting. For instructions in setting your speakerphone’s default volume, see Volume Control section in the system specific Other Advanced Features chapter on page.99

6 Comdial October, 02