ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO 62
The following figure shows the output size options:
To Auto Trim an item:
1. Click Auto Trim.
2. Click Trim.
The scanner senses the edges of the item on the glass and draws a
dotted line around the image in the window.
Check to make sure the dotted line encloses the image that you
want.
A new Scan Info box on the lower left portion of the Scan Manager
Pro shows the information for the autotrimmed area.
3. If the dotted line is not exactly where you want it, put the pointer
on the line and drag the mouse.
For example, if you want the scan to include a border around the
image, you can drag the dotted line to be slightly larger than the
autotrimmed area.