VXI VT1538A user manual SENSeFUNCtionFREQuency, SENSeFUNCtionPERiod, Parameters

SENS:FUNC:COND (@144:147)

[SENSe:]FUNCtion:FREQuency

[SENSe:]FUNCtion:FREQuency <ch_list> sets the SENSe function to

frequency for channels in <ch_list>. Also configures the channels specified

as digital inputs. See “About Period and Frequency Measurements” on page 16.

Parameters

Parameter	Parameter	Range of	Default
Name	Type	Values	Units
ch_list	string	100 - 163	none

Comments • If the channels specified are on an SCP that doesn’t support this function, an error will be generated. See your SCP’s User’s Manual for its capabilities.

•Related commands: SENS:FREQ:APER, SENS:FREQ:MODE

•*RST Condition: SENS:FUNC:COND and INP:POL NORM for all digital SCP channels

•Send with VXIplug&play Function: hpe14XX_cmd(...)

Usage See “About Period and Frequency Measurements” on page 16.

SENS:FUNC:FREQ (@144)

[SENSe:]FUNCtion:PERiod

[SENSe:]FUNCtion:PERiod (@<ch_list>) sets the SENSe function to period for channels in <ch_list>. Also configures the channels specified as

digital inputs. See “About Period and Frequency Measurements” on page 16.

Parameters

Parameter	Parameter	Range of	Default
Name	Type	Values	Units
ch_list	string	100 - 163	none

Comments • If the channels specified are on an SCP that doesn’t support this function, an error will be generated. See your SCP’s User’s Manual for its capabilities.

•Related commands: SENS:PER:APER, SENS:PER:NPER,

Agilent E1538A Enhanced Frequency/Totalize/PWM SCP 51