SENSe:PERiod:MODE?
SENSe:PERiod:MODE? (@<channel>) returns the measurement
interval mode currently set for period measurement.
Parameters
|
|
|
|
|
|
| Parameter | Parameter | Range of | Default |
|
| Name | Type | Values | Units |
|
|
|
|
|
|
|
| channel | string | 100 - 163 | none |
|
|
|
|
|
|
|
|
|
|
|
|
|
Comments •
•
•
SENSe:PERiod:NPERiods
<channel> must be a single channel on an E1538A SCP.
RETURNS: String value "APER" or "NPER", Type is String
.Send with VXIplug&play Function: hpe14XX_cmdString_Q(...)
SENSe:PERiod:NPERiods <count>,(@<ch_list>) sets the number of
signal periods to measure and average in order to compute the input signal period.
Parameters
|
|
|
|
|
|
| Parameter | Parameter | Range of | Default |
|
| Name | Type | Values | Units |
|
|
|
|
|
|
|
| count | numeric (uint32) | 1 to 255 MINimum MAXimum | seconds |
|
|
|
|
|
|
|
| ch_list | string | 100 - 163 | none |
|
|
|
|
|
|
|
|
|
|
|
|
|
Comments •
•This feature is only available when the NPERiods period mode is in use: SENSe:PERiod:MODE NPERiods,<ch_list>
•Related Commands: SENSe:PERiod:MODE
•RESET Condition: is “MINimum” (i.e. 1).
•.Send with VXIplug&play Function: hpe14XX_cmd(...)
