SOUR:RPULSE:VART TIME,(@143:144) algorithm will control pulse width by TIME
SOUR:RPULse:VARType?
SOUR:RPULse:VARType? (@<channel>) returns the type of value that
will be controlled (varied) by the algorithm.
Parameters
|
|
|
|
|
|
| Parameter | Parameter | Range of | Default |
|
| Name | Type | Values | Units |
|
|
|
|
|
|
|
| channel | string | 100 - 163 | none |
|
|
|
|
|
|
|
|
|
|
|
|
|
Comments • <ch_list> must specify a single channel only
•Returns the string "TIME" "ANGL"
Usage SOUR:RPULSE:VART? (@145) | returns the setting for chan 45 |
SOURce:RPULse:WIDTh[:ANGLe]
SOURce:RPULse:WIDTh[:ANGLe] <degrees>,(@<ch_list>) sets the width of the rotational output pulse before the INIT command that starts algorithm execution. With the pulse width thus fixed, the pulse position (in angle or time depending on how SOUR:RPUL:VARType is set) will be controlled by the algorithm.
Parameters
|
|
|
|
|
|
| Parameter | Parameter | Range of | Default |
|
| Name | Type | Values | Units |
|
|
|
|
|
|
|
| degrees | numeric (uint32) | 0 to 360 | degrees |
|
|
|
|
|
|
|
| ch_list | string | 100 - 163 | none |
|
|
|
|
|
|
|
|
|
|
|
|
|
Comments • Channels in <ch_list> must be referenced in a SOUR:FUNC:RPUL command before the next INIT command. Related error messages: 3113, "Channel specified is not in same SCP as reference channel."
3114, "First channel in SCP can not be used in RPULse output channel list."
•<degrees> has a resolution of 1 degree.
•Since the pulse width is specified in angle, changes in rotational velocity will not change the angular proportoin of the pulse. Of course, changes in rotational velocity do effect the pulse width as regards time.
Usage SOUR:RPULSE:WIDT:ANGL 260,(@147) preset channel 47 pulse width to
