SENSe:]FUNCtion:TOTalize
[SENSe:]FUNCtion:TOTalize <ch_list> sets the SENSe function to TOTalize for channels in <ch_list>. See “Totalize Positive or Negative Edge State Changes” on page 15.
Parameters
|
|
|
|
|
|
| Parameter | Parameter | Range of | Default |
|
| Name | Type | Values | Units |
|
|
|
|
|
|
|
| ch_list | string | 100 - 163 | none |
|
|
|
|
|
|
|
|
|
|
|
|
|
Comments • The totalize function counts rising edges of digital transitions at Frequency/Totalize SCP channels. The counter is 24 bits wide and can count up to 16,777,215.
•The SENS:TOT:RESET:MODE command controls which events will reset the counter.
•If the channels specified are not on a Frequency/Totalize SCP, an error will be generated.
•Related Commands: SENS:TOT:RESET:MODE,
INPUT:POLARITY
•*RST Condition: SENS:FUNC:COND and INP:POL NORM for all digital SCP channels.
•Send with VXIplug&play Function: hpe14XX_cmd(...)
Usage See “Totalize Positive or Negative Edge State Changes” on page 15.
SENS:FUNC:TOT (@134)
channel 34 is a totalizer
