VXI VT1538A user manual SOURceRPULseWIDThANGLe?, SOURceRPULseWIDThTIME, 00000787 to, Parameters

260 degrees

SOURce:RPULse:WIDTh[:ANGLe]?

SOURce:RPULse:WIDTh[:ANGLe]? (@<channel>) returns the width of the rotational output pulse currently set for <channel>.

Parameters

Parameter	Parameter	Range of	Default
Name	Type	Values	Units
channel	string	100 - 163	none

Comments • <channel> must specify a single channel only.

Usage SOUR:RPULSE:WIDT:ANGL? (@147) return pulse width for channel 47

SOURce:RPULse:WIDTh:TIME

SOURce:RPULse:WIDTh:TIME <seconds>,(@<ch_list>) sets the width of the rotational output pulse before the INIT command that starts algorithm execution. With the pulse width thus fixed, the pulse position (in angle or time depending on how SOUR:RPUL:VARType is set) will be controlled by the algorithm.

Parameters

Parameter	Parameter	Range of	Default
Name	Type	Values	Units
seconds	numeric (int32)	.00000787 to .015624	seconds
ch_list	string	100 - 163	none

Comments • Channels in <ch_list> must be referenced in a SOUR:FUNC:RPUL command before the next INIT command. Related error messages: 3113, "Channel specified is not in same SCP as reference channel."

3114, "First channel in SCP can not be used in RPULse output channel list."

•<seconds> specifies pulse width in seconds, with a resolution of 238.4nS

•.Since the pulse width is specified in seconds, changes in rotational velocity will not change the time proportion of the pulse. Of course, changes in rotational velocity do effect the angular proportion of the pulse.

Usage SOUR:RPULSE:WIDT:TIME .0040,(@147) preset channel 47 pulse width to 4 mSec

Agilent E1538A Enhanced Frequency/Totalize/PWM SCP 75