VXI VT1538A user manual SENSeTOTalizeRESetMODE?, SOURceFMSTATe, Parameters, Comments

Channel must specify a single channel.

is triggered.

•If the channels specified are not on a Frequency/Totalize SCP, an error will be generated.

•

•

•

Related Commands: SENS:FUNC:TOT, INPUT:POLARITY

*RST Condition: SENS:TOT:RESET:MODE INIT

Send with VXIplug&play Function: hpe14XX_cmd(...)

Usage SENS:TOT:RESET:MODE TRIG,(@134)	totalizer at channel 34 resets at
	each trigger event

[SENSe:]TOTalize:RESet:MODE?

[SENSe:]TOTalize:RESet:MODE? <channel> returns the reset mode for

the totalizer channel in <channel>.

Parameters

Parameter	Parameter	Range of	Default
Name	Type	Values	Units
channel	string	100 - 163	none

Comments •

•If the channel specified is not on a frequency/totalize SCP, an error will be generated.

•Returned Value: returns INIT or TRIG. The type is string.

•Send with VXIplug&play Function: hpe14XX_cmdString_Q(...)

SOURce:FM[:STATe]

SOURce:FM[:STATe] <enable>,(@<ch_list>) enables the Frequency

Modulated mode for a PULSe channel.

Parameters

Parameter	Parameter	Range of	Default
Name	Type	Values	Units
enable	boolean (uint16)	1 0 ON OFF	none
ch_list	string	100 - 163	none

Comments • This command is coupled with the SOURce:PULM:STATE command. If the FM state is ON then the PULM state is OFF. If the PULM state

Agilent E1538A Enhanced Frequency/Totalize/PWM SCP 63