SENSe:PERiod:NPERiods?
SENSe:PERiod:NPERiods? (@<channel>) returns the number of
signal periods the SCP will measure and average to calculate the signal period.
Parameters
|
|
|
|
|
|
| Parameter | Parameter | Range of | Default |
|
| Name | Type | Values | Units |
|
|
|
|
|
|
|
| channel | string | 100 - 163 | none |
|
|
|
|
|
|
|
|
|
|
|
|
|
Comments | • |
| • |
| • |
| • |
| • |
<channel> must be single channel on an E1538A SCP.
RETURNS: uint32 value which is the current period count configured.
Related Commands: SENSe:PERiod:NPERiods
*RST condition: SENSe:PERiod:NPERiods = 1
.Send with VXIplug&play Function: hpe14XX_cmdInt32_Q(...)
[SENSe:]PERiod:RANGe[:UPPer]
[SENSe:]PERiod:RANGe[:UPPer] <range>,<ch_list> can extend the range of period measurement from the default 1 second maximum to a 4 second maximum.
Parameters
| Parameter | Parameter | Range of | Default |
|
| Name | Type | Values | Units |
|
|
|
|
|
|
|
| range | numeric (float32) | 1 4 MAXimum MINimum | Sec |
|
|
|
|
|
|
|
| ch_list | string | 100 - 163 | none |
|
|
|
|
|
|
|
|
|
|
|
|
|
Comments • <ch_list> must be channels on an E1538A SCP.
•Range 1.0 sec provides period measurement in the range: 10usec - 1sec
Range 4.0 sec provides period measurement in the range: 40usec - 4sec
•MINimum = 1.0, MAXimum = 4.0
Note 1538As have a possible settings conflict:
