29

 

Testing the Safety Sensors

 

 

 

 

(If Installed)

 

 

 

 

 

 

 

 

Tools Needed:

 

WARNING

 

6” Height Object

 

WHEN PERFORMING THIS PART OF THE

 

 

TEST, DO NOT PLACE YOURSELF UNDER

 

 

DESCENDING DOOR, OR SEVERE OR

 

 

FATAL INJURY MAY RESULT.

 

 

Starting with the door fully open, place

 

 

a 6” high object on the floor, in line with

 

 

sensors, one foot from the left side of

 

 

the door.

 

 

Activation of the opener with the wall

 

 

station Up/Down button should cause the

 

 

door to move no more than one foot, stop

 

 

and then reverse to fully open position.

 

 

Repeat this test with the 6” high object

 

 

placed at the center of the door and then

 

 

one foot from the right side of the door.

 

 

The 6” high object, when placed on the

 

 

floor in line with sensors, while door is

 

 

closing, should also cause the door to

 

 

reverse.

 

 

 

 

12”

6”

12”

WARNING

IF OPENER DOES NOT RESPOND PROPERLY TO THESE TESTS (STEPS

28 AND 29), DO NOT USE DOOR UNTIL A QUALIFIED SERVICE PERSON HAS MADE NECESSARY ADJUSTMENTS/REPAIRS, OR SEVERE OR FATAL INJURY COULD RESULT FROM OPERATING THE DOOR/OPENER.

PRE-OPERATION

Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need. 32 You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com

Page 39
Image 39
Wayne-Dalton 3663-372 installation instructions Testing the Safety Sensors, Fatal Injury MAY Result