Wayne-Dalton 3790-Z installation instructions Pre-Installationinspection, Inspection

PRE-INSTALLATION INSPECTION

CAUTION! Do not install this opener on your door unless the following requirements are met.

Electrical outlet on	Electrical outlet on the	A
the ceiling is for	wall is for opener
light/opener

Mounting Surface

C

		Torquemaster® Plus	Torquemaster®
		Controls	B 1” Clearance for Motor
Torque Tube
	Learn	S1 S2 S3 S4 Delete
	Z-Wave enabled		End Bracket
	what’s

OPENING

your world?

With Z-Wave®technology you can control your lights, thermostat and start your morning coffee,

all withthe single touch of a button.

Find out more:

www.Wayne-Dalton.com/access

P/N 335982

Top of

Door

Pre-Installation			WARNING	PHOTOELECTRIC EYES ARE NOT REQUIRED ON WAYNE-DALTON
				SERIES 9000 AND MODEL 5120 AND 5140 DOORS. ALL OTHER
Inspection		DOORS, WHICH DO NOT		HAVE PINCH-RESISTANT SECTION JOINTS, REQUIRE PHOTOELECTRIC
	EYES TO PREVENT POSSIBLE SEVERE OR FATAL INJURY.

CAUTION: DO NOT INSTALL THIS OPENER ON YOUR DOOR UNLESS THE FOLLOWING REQUIREMENTS ARE MET. USE THE ILLUSTRATION ABOVE AS A VISUAL AID.

A. You must have a Wayne-Dalton Torquemaster® or Torquemaster®	D. Your door must not exceed 8' in height.
Plus counterbalance system to install this opener (see A above).	E. The idrive® opener will only work on sectional doors. Do not
B. The motor requires 1" of clearance above the top of the end
	install on one-piece doors.
bracket for Torquemaster and 1-1/4” of clearance above the top	F. Your garage door must be properly balanced (door must not be
of the end bracket for Torquemaster plus.
	heavy to lift, nor lift by itself).
C. Two electrical outlets are recommended for the idrive®	G. Horizontal tracks should be raised 1" above level at rear of Track.
installation. One of these outlets needs to be located less than 6'
from the opener. The second outlet, for the light, can be located	H. We do not recommend installing the idrive® opener on
at a position of your choice.	Model 9700 door widths of 16’ - 18’.
If, in the event that an electrical outlet is not located within 6' of	I. Maximum door weight (without spring tension) must not
the opener, contact a local electrician for further options. As a	exceed 304 lb.
convenience, an electrical outlet is provided on the light fixture.
The 6’ opener cord can be used with this outlet.

IIIPlease Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com