Pre-drill 3/32 pilot hole | Wayne-Dalton 3790-Z manual

✁	Cut-Out Template to Aid Installation

Pre-drill 3/32” pilot hole

Pre-drill 5/64” pilot hole

Wall Station Template

Keyless Entry Template

Please Do Not Return This Product To The Store

Call Us Directly! Our Trained Technicians Will Answer Your Questions and /or Ship Any Parts You May Need

Call Us Toll-Free: (888) 827-3667

Thank you for your purchase

www.wayne-dalton.com

44Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com

Page 50

Image 50

Wayne-Dalton 3790 Pre-drill 3/32 pilot hole, Pre-drill 5/64 pilot hole, Thank you for your purchase, Wall Station Template

Contents

Network Copyright 2008 Wayne-Dalton Corp. Part No Rev 2 7/16/2008Your For Package Contents When Installing a NEW Door with AN Idrive Look for this symbol Eyes to Prevent Possible Severe or Fatal Injury Pre-InstallationInspection WAYNE-DALTON Track Radius Photoelectric LOW Head System RequirementsTools Needed Door Models below require the use of photo eyes Table of Contents Deﬁnition of key words used in this manual Removal Retro-Fit InstallationDrum Wrap & End Bracket Spring Tension Removal Bracket and Gear End Bracket RemovalCenter Bracket & Cable Drum Even Fatal Injury Retro-Fit InstallationPowerful Spring Releasing ITS IMPORTANT! Right and Left Hand is End Bracket Removal Removal Top Bracket Re-Install If NecessaryVertical Track Height Adjustment 8000/8100/8200 Track Tracks to the Support Before Opening Door can Cause Door Top Roller AdjustmentFailure to RE-ATTACH Horizontal Installation Assembling Opener Cable Drums End Brackets Tools Needed Power Drill Socket Driver Wrench Step LadderSecure end bracket to the flag angle using Repeat for other end bracket Installation Cable Drum/ Drive Gear Counterbalance Springs End Bracket InstallationBrackets Support Bracket Positioning Support BracketAttaching Opener To Bracket Attaching Disconnect CablePliers Slack between opener and right end Handle Bracket Pilot drill lag screw location using 1/8 drill bitMounting Disconnect 6ft Attaching Disconnect Handle Disconnect Handle Usage Cable Adjustments Springs Tools Needed Vice Clamps Securing DoorFor Spring Winding Winding Springs Hands Tools Needed Drum Wrap InstallationRecommended Spring Turns IMPORTANT! do not Overwind Springs IMPORTANT! do not Overwind Setting Spring TensionProblems SCREWS. for Detailed Information on Drum Wrap Installation Mounting Wall Station Installing Battery Install hole plug into the screw hole in the light fixture Installing the Light FixtureDisconnect Power to If Included Attaching Diffuser Connecting OpenerPower Cord If Included For Proper Alignment Sensor Unit Sensor Wire Installation View of the Opener from the Front Safety Sensor Alignment Checking for Obstructions Profile Routine Standard Upper Limit On when program button is pushedProgramming Light Fixture On and remain on for 30 seconds Work Properly Adjusting DetentProfile Routine Custom Upper Limit Turn increments Lock Arm InstallationConfirm adjustment Tools Needed Tape Measure Step Ladder Lock Arm Installation Contact Obstruction Test Testing the Safety Sensors Fatal Injury MAY Result Emergency Disconnect Read and Follow ALL InstructionsDoor activation Never GO Under a STOPPED, Partially Open Door Operating the Wireless Wall Station Programming/Training HomeLink Unit Teaching HomeLink to the idrive opener Programming/Training HomeLink Unit Multi-Door Programming Customizing the SettingsCustom pet position For more profile options go to page 28 Maintenance Confirm pot nut position* shown below Power Connection Permanent Wiring OptionReconnect Power Potentiometer Gear Red Program Button Stations or Transmitters to OpenerProgramming Wireless WallHandle In Manual Door Operated Position Motor Up Position Light Button Large Button Troubleshooting Symptom Probable Cause Corrective Action Lock Arm Troubleshooting Dalton dealer or distributor Pre-drill 5/64 pilot hole Cut-Out Template to Aid InstallationPre-drill 3/32 pilot hole Thank you for your purchase Patent Information Models 3790/3790-Z

Wayne-Dalton 3790 Pre-drill 3/32 pilot hole, Pre-drill 5/64 pilot hole, Wall Station Template

Models: 3790-Z 3790

Cut-Out Template to Aid Installation