Wayne-Dalton 3790-Z Installation, Assembling Opener, Idrivefortorquemaster

1	idrive® for Torquemaster®
	Installation
	Assembling Opener
Tools Needed:	IMPORTANT! RIGHT AND LEFT HAND IS
None	ALWAYS DETERMINED FROM INSIDE THE
	GARAGE LOOKING OUT.
	NOTE: Older versions of the torque tube
	have a label applied on the right side that
	the opener will not slide over. Check the
	location of the label on the torque tube. If
	your torque tube has the label located on
	the right side, document the information on
	the label, then remove it completely using
	an adhesive remover or mineral spirits. If
	your torque tube has the label located on
	the left side, proceed with the following
	instructions.
	Lay the torque tube on the floor (inside
	garage) in front of the door with the labeled
	end to the left.
	Look into the opener’s left side to ensure
	the left hand bearing and the internal (black)
	sleeve are aligned with the torque tube
	profile.
	IMPORTANT! HOLD OPENER BY THE MAIN
	BODY. DO NOT HOLD BY THE MOTOR.
	Once aligned, slide the opener onto the
	right hand end of the torque tube. As the
	right end of the torque tube enters the
	internal (black) sleeve, rotate the opener
	back and forth slightly to help aid alignment.
	Continue sliding the opener onto the torque
	tube. Align the right hand bearing with the
	torque tube and slide the opener completely
	onto the torque tube until the torque tube
	exits the opener right hand bearing.
	NOTE: Do not force the opener onto the
	torque tube if misalignment occurs.
	Continue sliding the opener to the center
	of the torque tube.
	Plug the motor power cord into the opener.
	After completing this step, continue with
	Step 2 on page 8 for Torquemaster® Plus;
	Step 2 on page 10 for Torquemaster®.

		Sleeve has cam
		shaped pattern
		Left Hand Side
		Torque Tube and
		Bearing profiles					Motor
		aligned
		Align Torque Tube profile
		with Bearing profile
							what’s
							OPENING
							your world?
							®
							With Z-Wave
							technology you can
							control your lights,
							thermostat andstart
							your morning coffee,
							all withthe single
							touch of a button.
							Find out more:
							www.Wayne-Dalton.com/access
		Right Hand End					®INSTALLATION
		of Torque Tube
		cam shape
ntrols							Right Hand End of
S3	S4	Delete
							Torque Tube coming
							out of right hand side
							of idrive.
							®IDRIVEFORTORQUEMASTER
						Controls
			Learn	S1	S2	S3 S4	Delete
		Z-Wave enabled
		what’s
		OPENING
		your world?
		®
		With Z-Wave
		technology you can
		control your lights,
		thermostat andstart	Plug-in Motor
		your morning coffee,
		all withthe single
		touch of a button.
		Find out more:	Power Cord
		www.Wayne-Dalton.com/access

Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need. 7 You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com