25
Tools Needed:
None
Profile Routine
(Custom Upper Limit)
WARNING
TO AVOID INJURY, NO ONE SHOULD CROSS THE PATH OF A MOVING DOOR!
NOTE: If no obstruction interferes with a standard upper limit, skip this step.
NOTE: The door must be in its fully closed position and the disconnect handle must be in the motor operated position (upper position) to initiate the profile routine.
NOTE: Install profile will not run if safety sensors are not aligned (Only if required for your door).
Press and hold the profile button for five (5) seconds. The opener will beep twice, release the profile button, indicating the activation of the profile routine.
When the door moves to the desired upper limit, press and hold the Up/Down button on the wall station until the door stops. Next, the door will close completely. The Up/Down button (when door is closed) can be activated by pressing center of flip cover.
Next, the door will go through one more Up/ Down cycle. Once this is complete, the door limits are set and the profile is complete.
Alternately, once an profile routine has been successfully completed, disconnect door and manually move to desired upper limit.
NOTE: For a more precise location of the custom upper limit, see “Customizing the Settings” on page 37.
Up/Down
Button
Profile Button
26 | Adjusting Detent | |
| ||
|
| |
Tools Needed: | The amount of pressure the opener | |
uses to pivot the motor downward is | ||
| ||
Flat Tip | preset at the factory via the detent pin | |
Screwdriver | adjustment screw. | |
| ||
Step Ladder | Due to variations in door installations, | |
a detent pin adjustment may need to | ||
| ||
| be made in order to insure proper pivoting | |
| of the motor. | |
| IMPORTANT! FOR SYSTEM SECURITY: | |
| THE MOTOR IS DESIGNED TO PIVOT DOWN | |
| AFTER THE DOOR CLOSES COMPLETELY. IF | |
| THE MOTOR DOES NOT PIVOT OR PIVOTS | |
| TOO SOON, THE DETENT PIN ADJUSTMENT | |
| SCREW MAY NEED TO BE ADJUSTED IN | |
| ORDER FOR THE DOOR LOCK FEATURE TO | |
| WORK PROPERLY. | |
|
|
Detent Pin
Adjustment Screw
Z- | Wave | ® | enabled |
|
| ||
|
|
|
|
| what’s | ||
| OPENING | |||
| your world? | |||
| With Z- | ® | ||
|
| |||
| technology | Wave |
| |
| you can | |||
| control |
| ||
|
|
|
| |
| your l |
| ||
| thermostat | ights, |
| |
| your | andstart |
| |
| mor |
|
|
|
| ning coffee, |
| ||
| all withthe | single |
| |
| t |
|
| |
| ouch |
|
|
|
| of a b |
|
| |
|
| utton. |
| |
www. | Find out more: |
| ||
| Wayne- |
|
|
|
| Dalton.co |
|
|
|
| m/access |
|
| |
| P/N 335982 |
|
|
|
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need. 29 You can reach us Toll Free at
