Wayne-Dalton 9600, 9400, 9100 installation instructions Cable Drums

17	Cable Drums
Tools Needed:	Shake the TorqueMaster® spring tube
Tape Measure	assembly gently to extend the winding
	shafts out about 5" on each side. For
Step Ladder	single spring applications, there will be
	no left hand spring in the
	TorqueMaster® spring tube assembly.
	Lift the TorqueMaster® spring tube
	assembly and rest it on the top of the
	flagangles.
	NOTE: Cable drums are marked right
	and left hand. Cable drums and
	TorqueMaster® spring tube assembly
	are cam shaped to fit together only one
	way.
	Pre-wrap the TorqueMaster® Plus
	cable drum with the counter balance
	cable either 1/2 or 1-1/2 wraps (see
	illustrations).
	To install the cable drum, slide the
	correct cable drum over the winding
	shaft until the cable drum seats against
	the TorqueMaster® spring tube
	assembly.
	The winding shaft must extend past the
	cable drum far enough to expose the
	splines and the groove. Align the
	winding shaft groove with the round
	notch in the flagangle.

TorqueMaster®

Spring Tube Assembly

Winding

Shaft

5”
TorqueMaster® Spring Tube	Right Drum	Counterbalance Cable
Assembly

		1/2 Wrap Shown
TorqueMaster® Spring Tube			Right Drum	Counterbalance Cable
	Assembly

1-1/2 Wrap Shown

Splines

Groove

Winding shaft

For double spring applications:

Repeat for opposite side.

For single spring applications: Insert

the loose winding shaft into the left

hand cable drum prior to sliding the

cable drum over the TorqueMaster®

spring tube assembly.

Round Notch Flagangle

Cable Drum

NOTE: On single spring applications,

take care in handling the loose winding

shaft (left side) so that it does not slide

back into the TorqueMaster® spring

tube assembly.

20

Counterbalance Cable

Winding shaft

Cable

Drum

Groove

Splines

Loose Winding ShaftUse th thislabeesel.Illustr

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com