Wayne-Dalton 9400 Trolley Operator, At Time Of Installation, As Described In Your, Tools Needed

Trolley Operator

Tools Needed: WARNING

OPERATOR MUST BE TESTED

AT TIME OF INSTALLATION

AND MONTHLY THEREAFTER

AS DESCRIBED IN YOUR

INSTALLATION INSTRUCTIONS

AND OWNER’S MANUAL, TO

ENSURE THAT DOOR SAFETY

FEATURES FUNCTION. FAILURE

TO TEST OR MAKE ANY

NECESSARY ADJUSTMENTS OR

REPAIRS, CAN RESULT IN SEVERE

OR FATAL INJURY.

1.Install operator rail 1/2” to 1-1/2” (13 - 38 mm) above high arc of top section of the door.

2.Mount operator to ceiling so that 1” to 1-1/2” (25 - 38 mm) clearance is maintained between trolley rail and top section when door is fully open (trolley rail will slope down towards rear).

3.Attach door arm to operator bracket.

4.Attach operator rail to suitable mounting surface, 2 x 6 lumber minimum.

5.Attach operator to ceiling using perforated angle.

IMPORTANT: Angles must be securely attached to sound framing member(s).

OPERATOR RAIL

SUITABLE MOUNTING

SURFACE 2 X 6

LUMBER MINIMUM

DOOR ARM TO

OPERATOR BRACKET

HEADER

OPERATOR

rail

perforated

angle

OPERATOR

Operator Hairpin

Bracket Cotter

Operator Bracket tabs

Door

Arm

5/16” x 1-1/4”

Clevis pin

Top view

Operator	Hairpin Cotter
bracket tabs	(Outside of
	operator
Door arm	bracket tab)
	FRAMING MEMBERS

PERFORATED ANGLE

36

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com