Wayne-Dalton 9400, 9100, 9600 installation instructions Package Contents

Package Contents

NOTE: Depending on the door model, some parts listed will not be supplied if not necessary. rear supports may or may not be included with your door.

(2) Horizontal Tracks RH/LH

	(2) Fully Adjustable
door sections (as required)	RH/LH Flagangles

(1) TorqueMaster® Spring Tube

end brackets

LH/RH

(2) drum wraps	(1) Center Bracket	(1) Loose Winding Shaft	right and left cable
LH/RH	assembly	(SINGLE SPRING only)	drum assemblies

(2) Vertical

RH/LH Tracks

(2) TOP BRACKET	(2) TOP BRACKET	Rollers
Bases	Slides	(as required)

(1) operator bracket	weather seal &	asymmetrical U-BAR
	nails (if included)	(if included)

5/16”- 18 Hex Nuts	1/4”- 20 Flange Hex	3/8”- 16 Hex
(as required)	Nuts (as required)	Nuts (as required)

#6 screw eye and pull

rope (if included)

U-BAR

(if included)

1/4”- 20 x 5/8” Carriage

Bolts (as required)

quick install jamb

brackets (as required)

5/16” X 2” HEX Lags (as required)

1/4”- 20 x 11/16” Self Drilling

Screws (as required)

(1) COTTER PIN

		(2) #12 x 1/2”	3/8”- 16 x 3/4”	(1) 5/16” x 1-1/4”
5/16” - 18 X 3/4” CARRIAGE	1/4”- 14 x 5/8” Self Tapping	Phillips head
			hex head
BOLTS (as required)	Screws (as required)	screws		Clevis PIN
			bolts (as required)

3

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com