Wayne-Dalton 9400, 9100, 9600 installation instructions Top Brackets

7	Top Brackets	1st Set
Tools Needed:	NOTE: The top brackets may be pre-	(10” & 12” Radius)
		top section
Power Drill	assembled in some cases.
			(4) 1/4” - 14 x 5/8”
		2nd set
7/16” Socket	To install the L-shaped top brackets,	(14” radius)	SELF TAPPING
			SCREWS
	align the top holes in the top bracket
Driver
	base with:	TOP BRACKET BASE
	a) the second set of holes in the endstile
	for 14” radius track.
	b) the first set of holes in the endstile for		(2) 1/4”- 20 x 5/8”
	10” & 12” radius track.
			CARRIAGE BOLTS
	Fasten using (4) 1/4”- 14 x 5/8” self
	tapping screws.
		TOP BRACKET SLIDE
	Hand tighten the top bracket slide to the
	bracket base using (2) 1/4”- 20 x 5/8”
	carriage bolts and (2) 1/4”-20 flange
	hex nuts.
	The top bracket slide will be tightened	TOP SECTION
	and adjusted in Step 13. Insert rollers		(2) 1/4”- 20
	into top bracket slide. Repeat for other
			FLANGE HEX
	side.
			NUTS
			ROLLER
		TOP SECTION	TOP BRACKET SLIDE
12

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com