Wayne-Dalton 9600, 9400, 9100 installation instructions Tools Required, Removing An Existing Door

	Tools Required
pencil	ratchet Wrench	vice grips		1/2”, 7/16” socket		gloves	5/8”, 1/2”, 7/16”	level
				driver			& 9/16” Socket
3” extension	flat tip screwdriver		3/16”, 7/16” & 1/8”		Safety Glasses		1/2, 7/16” & 9/16”	hammer
				drill bits			Wrenches
	Hacksaw			Tape Measure		vice clamps
sawhorse	pliers/cutters			Phillips Head
						power drill		Step Ladder
				Screwdriver

Removing An Existing Door

Counterbalance spring tension must always be released before any attempt is made to start removing an existing door.

WARNING

A powerful spring releasing its energy suddenly can cause severe or fatal injury. To avoid injury, have a trained door systems technician, using proper tools and instructions, release the spring tension.

For detailed information see supplemental instructions “removing an existing door/preparing the opening”. These instructions are available at no charge from Wayne-Dalton Corp., P.O. Box 67, Mt. Hope, OH 44660, or at www.wayne-dalton.com.

5

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com