Wayne-Dalton 9400, 9100, 9600 installation instructions Counterbalance Drums, Bottom Section

3		left hand torquemaster®
	Counterbalance Drums	PLUS counter balance drum		#1 end hinge
		BOTTOM SECTION		(hinge tube)
Tools Needed:	IMPORTANT: Right and left hand
None	is always determined from inside		rollers
	the building looking out.
	NOTE: For door section identification
	see page 4.	Counterbalance
	TorqueMaster® Plus counterbalance	cable
	drums are marked right and left hand.
	Uncoil the counterbalance cables and
	make sure you place the right hand
	cable loop on the right hand milford
	pin and place the left hand cable loop
	on the left hand milford pin. Insert a	MILFORD PIN		bottom bracket
	roller into bottom bracket of the bottom
	section and insert another roller at			INSTALLATION
	#1 end hinge at the top of the bottom
	section. Repeat for other side.		BOTTOM
			SECTION
		astragal
4	Bottom Section
Tools Needed:	Center the bottom section in the door
Level	opening. Level section using wooden
	shims under the bottom astragal if
	necessary.
			weather seal
			door opening
			level
		BOTTOM
		SECTION
				wooden shims
				(if necessary)
				9

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com