Wayne-Dalton 9100, 9400, 9600 installation instructions Door Section Identification

	Door Section Identification
Tools Needed:	Hinges are always pre-attached at the top		warning label
	of each section (except top section) and
	the hinges are stamped for identification,
	#1, #2, #3, and #4 (#4 only on five	#4				Top Section
	section doors). See view below. The
	stamp identifies the stacking sequence
	of the section. The sequence is always
	determined by #1 being the bottom section
	to #3 or #4 being the highest intermediate
	section. See views to the right. If the
	stamp on the end hinge is illegible, refer			Intermediate II Section
	to the section side view illustration to the	#3
	right.
	The section side view illustration shows				warning label
	the end hinge profile of all the sections,
	and can also be used in conjunction with
	identifying each sections.				Intermediate Section
		#2
	The bottom section can be identified
	by a #1 end hinge, the factory attached
	astragal, or by the bottom bracket warning
	labels on each end stile. This section is
	always the 1st section from the bottom of
	the door.					Lock Section
	The lock section can be identified by a	#1
	#2 end hinge. This section is always the
	2nd section from the bottom of the door.				Bottom Bracket
	The intermediate section can be				warning Labels
	identified by a #3 end hinge. Sections will
	have a warning label attached to either the				Bottom Section
	left or the right end stile of the section.		astragal
	This section is always the 3rd section from
	the bottom of the door.				SECTION side view
	The intermediate II section can be							1 19/32”
	identified by a #4 end hinge. This section if	7/8”			1 1/8”		1 3/8”
	always the 4th section from the bottom of
	the door on five section doors only.
	The top section can be identified with
	no pre-installed end or center hinges on							#4 end
	the section and the warning label attached	#1 end		#2 end			#3 end
	in the upper middle of the section.	hinge		hinge			hinge	hinge

BOT.	LOCK	INT.	INT II	TOP
			(USED ONLY
			ON FIVE
BOTTOM			SECTIONS)
BRACKET

typical hinge stamping location ASTRAGAL

4

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com