Wayne-Dalton 9600, 9400 Installing Q.I. Jamb Brackets Continued, Attaching Fully Adjustable, None

Cutting Vertical Track and

Installing Q.I. Jamb Brackets

Continued

Tools Needed:

Tape Measure

Hacksaw

Power Drill

5/16” Drill Bit

Vertical Track Cutting Chart

Horizontal	Vertical Track Cut Length	Vertical Track Cut Length
Track Radius
10”, 12”	Door Height Minus 10”
14”	Door Height Minus 8”	Cut vertical
3-1/2” LHR	Door Height Minus 15”	track here
6-1/2” LHR	Door Height Minus 12”

1/2” 5/8”

5/16”

5/8”

JAMB BRACKET SCHEDULE

DOOR	1ST SET		2ND SET		3RD SET
	JAMB		JAMB		JAMB
HEIGHT		POSITION		POSITION		POSITION
	BKT		BKT		BKT
6’0”	QIJB-3	MIDDLE	QIJB-6	TOP	NOT APPLICABLE
6’5”	QIJB-3	MIDDLE	QIJB-5	BOTTOM	NOT APPLICABLE
6’8”	QIJB-3	MIDDLE	QIJB-5	BOTTOM	NOT APPLICABLE
7’0”	QIJB-3	MIDDLE	QIJB-5	BOTTOM	NOT APPLICABLE
7’3”	QIJB-3	MIDDLE	QIJB-5	MIDDLE	QIJB-6	MIDDLE
7’6”	QIJB-3	MIDDLE	QIJB-5	MIDDLE	QIJB-6	MIDDLE
7’9”	QIJB-3	MIDDLE	QIJB-5	MIDDLE	QIJB-6	MIDDLE
8’0”	QIJB-3	MIDDLE	QIJB-5	MIDDLE	QIJB-6	MIDDLE
(4 SECTION)
8’0”	QIJB-3	BOTTOM	QIJB-5	BOTTOM	QIJB-6	BOTTOM
(5 SECTION)

		Attaching Fully Adjustable
Horizontal		Flagangle to Vertical Track
track	2
Tools Needed:		Hand tighten the flagangle to the
	None	vertical track using (2) 1/4”- 20 x 5/8”
		carriage bolts and (2) 1/4”- 20 flange
		hex nuts.
		Repeat for opposite side.
		The flange nuts will be tightened after
		flagangle spacing is complete (Step 11).

fully

adjustable flagangle

(2)1/4”- 20

Flange hex Nuts

(2) 1/4”- 20 x 5/8” carriage bolts

vertical track

8

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com