Xantrex Technology XFR 2800 manual Output Strain Relief and Cover

Installation

Load Connection

Output Cover The power supply comes with a bus bar cover and strain relief. See Figure 2.4. This cover is also installed on models fitted with the high voltage output connector.

To detach the 2-part cover:

1.Undo 6-32 x 5/16 in. Phillips pan head screws, 6 x 0.288 in. lock washers, and 6 x 5/16 in. flat washers (3 places) from the top cover.

2.Pull up on the top cover to remove it.

3.Undo 6-32 x 1/4 in. Keps nuts and 6 x 5/16 in. flat washers from the chassis-mounted PEM studs (3 places) to remove the chassis cover.

Screw, Lock Washer, and Flat Washer

(3 places)

Keps Nut and

Flat Washer (3 places)

Wire Clamp

and Screw

Strain Relief

Chassis Cover

Top Cover

Figure 2.4 Output Strain Relief and Cover

Release 2.1 47