DEFINING PRODUCTION JOBS | DEFINING THE ATTACHMENT |
|
|
Copying an attachment definition
If you want a copy of the attachment definition, select an attachment definition on the Attachment tab and use the Write As feature to rename it.
The name of the selected definition will be displayed and highlighted.
To enter a new name, use the alphanumeric keyboard or press << to clear the field and enter the name.
To edit the displayed name, press < or > to place the cursor in the correct position and enter the new information using the alphanumeric keyboard.
Exporting an attachment definition to the Production screen
Press the 
button to export the attachment definition to the current Production screen.
Exporting definitions will not be possible in the following situations:
•When the printer is set to Ready. The printer needs to be in a Not Ready state; otherwise the button is grayed out.
•When trying to export a definition that is no different to a definition of the same name already existing on the Production screen. In this case, the button is also grayed out. To be able to export a definition that has the same name as one already on the Production screen, you will need to have made changes to that definition.
Deleting an attachment definition
To delete an attachment definition:
1.Select the Definitions tab, the Attachment tab, then the appropriate type of attachment (Channel or TCP/IP) tab.
2.Choose an Attachment from the
3.Press the
button to delete the attachment.
The Delete screen containing the list of existing attachments is
displayed. Press 
to delete the attachment or 
to exit without deleting.
Note: You cannot delete the Default Attachment or an attachment definition in use within the Production screen.
|
|
|
Xerox 495 Continuous Feed Duplex Printer Operator Guide | Page | |
