CANCELLING JOBS | RUNNING PRODUCTION JOBS |
|
|
Cancelling jobs
The Cancel button is used to interrupt print jobs from the host system or to cancel a Print Position Check.
Cancelling a print job
When the Cancel button is pressed during a print job, the following dialog box will be displayed:
•Press the Discard Buffers button to stop the current print job and discard all pending print buffers from the printer leaving the job in the host job queue. If no forward or backward commands are made at the host system then the host will resume printing at the next page once the printer is ready again.
This procedure is used when you need to stop the current print job to reposition it or when a print alignment is interrupted due to an error and does not resume after the error is corrected. In this case, the bubble menu will remain empty as the print alignment is not considered to be terminated.
•Press the Cancel Job button to cancel the job currently being printed. Then set the printer to Ready. The printer reports the cancel to the host system in order to delete it from the host job queue. To restart the job you will have to resubmit it. This procedure is used when you need to stop the current print job and want to delete it from the host job queue.
•Press the No button if you do not want to cancel the print position check.
Cancelling a print position check
When the Cancel button is pressed during a print position check, the following dialog box will be displayed:
•Press the Yes button to cancel the print position check.
•Press the No button if you do not want to cancel the print position check.
|
|
|
Page | Xerox 495 Continuous Feed Duplex Printer Operator Guide | |
