PRODUCT OVERVIEWUNDERSTANDING THE TOUCH SCREEN
| Background colour | |
| The device background changes colour and pattern according to the | |
| device state and its alignment condition.” | |
| The device state determines the background colour. The following table | |
| shows the possibilities. | |
|
|
|
Colour |
| Meaning |
|
|
|
|
| Red - The device is in error. |
|
| To clear the error, you should refer to the relevant error clearing |
|
| procedure in the error help. |
|
|
|
|
| Light Gray - The device is in a Ready state. |
|
| Note: The background colour is light gray and not green |
|
| because it is the normal device state and should not retain the |
|
| operator attention. If the colour changes to green and is striped, |
|
| then it is ready but not aligned. |
|
|
|
|
| Yellow - The device is in a Not Ready state. |
|
| You need to make the device Ready by pressing the START |
|
| button. |
|
|
|
|
| Blue - The device is warming up. |
|
| You need to wait a few moments while the device warms up. |
|
|
|
|
| Purple - The device is in maintenance mode. |
|
|
|
|
| Dark Gray - The device is powered OFF. |
|
| You need to power it ON before printing. |
|
|
|
|
| Orange - The device is in a soft stop state. |
|
|
|
| The colour becomes striped when the device is not aligned. The | |
|
|
|
Xerox 495 Continuous Feed Duplex Printer Operator Guide | Page | |
