CLEARING PAPER JAMS | PROBLEM SOLVING |
|
|
14.Hold the fuser exit guide lever and open the guide completely.
Fuser Exit Guide
Lever
After checking for jammed paper, carefully close the guide.
15.Close the Fuser Left door and open the Right Stacker door.
16.While holding the pinch roller unit lever, pull the lock bracket to open the unit completely.
Pinch Roller Unit
Lever
After checking for jammed paper, close the unit carefully until it is locked.
17. Close the right stacker door.
Removing non-fused paper
1.Open the right stacker door and press the stacker table DOWN switch. After the stacker has moved down about 10 cm, press the STOP switch.
2.Cut the top perforation of the paper.
3.Release the paper tension selector lever.
4.If the paper is not badly torn and can be transported by the tractors, remove the paper as shown in this step. If the paper is badly torn then go to step 5.
• Press the RESET button on the stacker panel.
|
|
|
Page | Xerox 495 Continuous Feed Duplex Printer Operator Guide | |
