![](/images/new-backgrounds/1168125/168125193x1.webp)
7. Defining production jobs
This chapter contains the procedures for creating jobs. All of the screens are accessed under the Definitions tab, the facilities of which are available to the Key Operator level User and above.
To create a new job, the paper to be used must be defined and must be available. The printing application must have been created at a system level in order to be able to carry out tests.
Once a job has been created, you will normally only have to recall the job and load the correct paper to be able to print it. For duplex jobs, check that the attachment to be used is available in the print line segment selected.
|
|
|
Xerox 495 Continuous Feed Duplex Printer Operator Guide | Page |