EJECTING PAPER FROM THE PRINTER | PAPER PATH |
|
|
Ejecting paper from the printer
Ejection can take place using either of the Eject buttons on the action bar at the bottom of the touch screen. In addition, you can eject paper using a selection from the bubble menu associated with a device.
The Eject button only works for the device from which the eject is requested and affects the whole print line. The possibilities are:
The Eject one page button moves the paper on by one sheet for each press.
The multi page eject button moves the paper on by the number of sheets dis- played (30 in the illustration) for each press.
The number of pages to be ejected when the button is pressed will be the distance between devices determined at installation.
The infinite eject button will continue to eject paper until the STOP button on the touch screen is pressed, even if the stacker is not ready or full.
Note: To switch between the multi page and infinite eject states, press the button for a few seconds until the button changes to the state that you require.
The bubble menu possibility is Release which is available for any paper master device on the line and will move sufficient paper to clear the print line from that device onwards. Therefore, if you choose Release from the Unwinder bubble menu, all the paper in the print line will be moved. You can release paper by pressing the appropriate icon on the print line and choosing Release from the bubble menu.
|
|
|
Page | Xerox 495 Continuous Feed Duplex Printer Operator Guide | |
