Xerox 495 manual Maintenance information, Ozone safety information, For consumables

Models: 495

1 242
Download 242 pages 35.28 Kb
Page 221
Image 221

MAINTENANCE INFORMATION

Maintenance information

Do not attempt any maintenance procedure that is not specifically described in the documentation that is supplied with your copier/printer.

Do not use aerosol cleaners. The use of cleaners that are not approved may cause poor performance of the equipment, and could create a dangerous condition.

Use supplies and cleaning materials only as directed in this manual. Keep all of these materials out of the reach of children.

Do not remove covers or guards that are fastened with screws. There are no parts behind these covers that you can maintain or service.

Do not perform any maintenance procedures unless you have been trained to do them by an authorized local dealer or unless a procedure is specifically described in the user manuals.

Ozone safety information

This product will produce ozone during normal operation. The ozone produced is heavier than air and is dependent on copy volume. Providing the correct environmental parameters as specified in the Xerox installation procedure will ensure that the concentration levels meet safe limits.

If you need additional information about ozone, please contact your authorized local dealer or Service Provider.

For consumables

Store all consumables in accordance with the instructions given on the package or container.

Keep all consumables away from the reach of children.

Never throw toner, toner cartridges or toner containers into an open flame

Product safety certification

This product is certified by the following Agency using the Safety standards listed.

Agency

Underwriters Laboratories Inc

Standard

IEC60950

This product has been manufactured under a registered ISO9001 Quality system.

 

 

 

Xerox 495 Continuous Feed Duplex Printer Operator Guide

Page A-5

Page 221
Image 221
Xerox 495 manual Maintenance information, Ozone safety information, For consumables, Product safety certification