110Interface Serial, TTP 2010

Caution • Using a non-approved cable with the printer may void the FCC and other EMC

approvals of the printer.

Serial, TTP 2010

The RS-232 interface of the TTP 2010 printer has a transfer speed that can be set to between 2 400 and 115200 bits/s.

Applications where text-only printouts are to be printed are suitable for serial interface because of its easy to use bi-directional capability. The relatively low transfer speed limits the printing speed when printing graphics. Full-width graphics with 115 200 bits/s result in printing speeds of about 24 mm/s for the 80-mm version of the printer.

Figure 32 • Serial Interface Cable 10825-000

 

 

 

 

2

RxD

RxD

2

 

 

 

 

 

 

 

 

3

TxD

TxD

3

 

 

 

 

 

 

 

 

4

DTR

DTR

4

 

 

 

 

 

PC

 

 

6

DSR

DSR

6

 

Printer

 

 

 

 

7

RTS

RTS

7

 

 

 

 

 

 

 

 

 

 

5

4 3

2

1

8

CTS

CTS

8

5

4

3 2

1

 

 

 

 

1

DCD

DCD

1

 

 

 

 

9

8

7

6

5

GND

GND

5

9

8

7

6

 

Female

 

9

RI

RI

9

 

Female

 

Serial Cable 10825-000

Setup Options

Baud:

2 400, 4 800, 9 600, 19 200, 38 400, 57 600, and 115 200

 

bits/s

 

 

Flow control:

None, Xon / Xoff, or Hardware

 

 

Data bits:

7/8

 

 

Stop bits:

1 (fixed)

 

 

Parity:

None, Odd, or Even

 

 

Default settings: 9600 bits/s, 8-bits, No parity, 1 stop bit, and hardware flow control.

See also: Default Parameter Settings on page 79.

P1002902-002

TTP 2000 Technical Manual

09/14/2009