|
|
|
| Default Parameter Settings |
| 89 | |
|
|
|
|
| |||
|
|
|
| Print Setup |
|
| |
| 1 | Default |
|
|
|
|
|
36 | Document Mode | DRV |
|
|
| ||
0 | Min |
|
|
| |||
| 2 | Max |
|
|
|
|
|
Determines what should control the page length:
<ESC>&P<36><0> Fixed Document Mode. Shorter documents will automatically be extended, while longer documents will be divided into several pages of the desired length. Page length will be the length set by parameters 37 and 38.
<ESC>&P<36><1> Variable Document Mode. The length of the page varies with the contents (printouts shorter than the value specified by parameters 37 and 38 will be extended to that length).
<ESC>&P<36><2> Black Mark Mode. Marks on the paper set the form length. Minimum one form length is always fed. If a black mark is found before that, the printer feeds to the next black mark, then cuts and ejects. This ensures that no small paper strips are cut of and left in the printer.
Note • Max page length in Fixed Document Mode is about 140 mm , see Fixed Document Mode on page 91.
09/14/2009 | TTP 2000 Technical Manual |