12Product Presentation Controls

Controls

Figure 3 • Rear View

PrintPrintheadHead lock/

lock/cuttercutter protectionguard

Feed Button

Power Indicator

Paper low

Connector

 

Power

Status Indicator Interface Connector

Connector

The Feed button and indicators are duplicated on both sides of the printer so that they are easily accessible regardless of how the printer is installed.

Feed Button

The blue Feed button has several functions:

R

 

d

 

 

 

r

 

 

 

 

 

 

e

 

s

 

e

 

w

 

u

e

 

o

 

 

t

 

F

 

 

 

a

 

 

 

P

 

 

t

 

 

 

 

 

 

 

S

 

 

•Press and release will feed, cut, and present a complete page.

•Any data in the print buffer will be printed. If the buffer is empty the page will be blank.

In black-mark mode, the page will be synchronized with the black-mark.

•On printer with firmware 3.83 and higher, press and hold Feed for three seconds while turning on the power, or press and hold Feed just after closing the print head, will print a self-test printout.

•On printers with old firmware, lower than version 3.83, press and hold Feed while turning on the printer or press and hold Feed just after closing the print head, to print a self-test printout (See Making a Self-Test Printout on page 26).

•Press and hold Feed while closing the print head and the printer will enter top of form

sensor calibration mode (see Black Mark Calibration Process on page 103).

P1002902-002

TTP 2000 Technical Manual

09/14/2009