Product Presentation 13

Controls

Power Indicator

When the ● green power indicator is illuminated, a 24V supply is connected to the printer.

Status Indicator

The ●orange status indicator has several functions:

•ON constantly — the printer is operational

•Flash, flash, pause, flash, flash— is the warning-codefor paper low.

The warning-code is reset automatically when the condition causing it is removed. This behavior can be enabled by setting parameter 52 (Warning Level) to 001.

•Flashes rapidly — indicates error. Press and hold the Feed button and the number of flashes will reflect the status-code.

1

Presenter jam, paper cannot be ejected / retracted

 

 

2

Cutter cannot return to home position

 

 

3

Out of paper

 

 

4

Print Head lifted

 

 

5

Paper feed error (under head)

 

 

6

Temp error, print head is above 60°C

 

 

7

Paper jam during present

 

 

8

Paper jam during retract

 

 

10

Black mark not found (on media load)

 

 

11

Black mark calibration error

 

 

Fast flashes

Checksum error at firmware loading

 

 

Steady light

Wrong firmware type

 

 

Status codes are reset when:

•the conditions causing them are removed

•the printer is power cycled (turned off/on)

•the print head is lifted and then lowered to clear a paper jam.

09/14/2009

TTP 2000 Technical Manual

P1002902-002