Zebra Technologies TTP 2000 Serial Interface Set-Up

82Default Parameter Settings Summary of Parameter Settings

					TTP model
Parameter	Description	ESC&F Default	Page	2010			2030
						2020
58	Out of paper level	0	page 96	X		X	X
59	USB vendor Class	0 (Printer Class)	page 97				X
60	Partial cut length	10	page 97	X		X	X

Note • When the printer is set up the way you like it to be, you send <ESC>&<4>, and all settings will be stored.

Serial Interface Set-Up

1	96	Default	Baud Rate
	11	Min
	96	Max

Stores the communication speed on the serial interface.

<ESC>&P<1><24>	2400 bps
<ESC>&P<1><48>	4800 bps
<ESC>&P<1><96>	9600 bps
<ESC>&P<1><19>	19200 bps
<ESC>&P<1><38>	38400 bps
<ESC>&P<1><57>	57600 bps
<ESC>&P<1><11>	115200 bps

			Note • If you set an invalid value, the baud rate will return to the previous value.
	8	Default
2			Data Bits
	7	Min
	8	Max

Selects if 7-bit ASCII, or 8-bit, is used on the serial interface.

<ESC>&P<2><8>	8-bits (characters 0-255)
<ESC>&P<2><7>	7-bits (characters 0-127)

Important • In 7-bit mode you can not print graphic, read status or set parameters because no value can ever be greater than 127.

P1002902-002 TTP 2000 Technical Manual 09/14/2009