Specifications 129
Dimensions
Install the Universal Media Roll Holder1.See Figure 36. Install the spacer onto the printer with the two mounting screws.
2.In what position is your printer mounted?
If… Then…
Horizontal a. See Figure 38. Horizontal Positions.
High, Low, or Under.
b.Align the holes in the arm and spindle assembly with the two spacer mounting screws and then install the mounting screw.
c.See Figure 37. Reposition the spindle to keep the media roll centering guides facing up.
Vertical a. See Figure 38. Vertical Position.
b.Align the holes in the arm and spindle assembly with the two spacer mounting screws and then install the mounting screw.
c.See Figure 37. Reposition the spindle to keep the media roll centering guides facing up.
Figure 37 • Media Roll Centering Guides
Media Roll
Centering Guides
3.Fit the optional paper low sensor onto the roll support, fasten the cable with tie wraps, and connect it to the connector on the back of the printer.
09/14/2009 | TTP 2000 Technical Manual |