Installation 25
Connecting the Power
Connecting the Power
Figure 15 • Location of Power Connector
Power
Connector
Use the appropriate Zebra power supply (see Figure 41 on page 132 and Figure 42 on page 132 for illustration and part number).
1.Caution • Connecting the printer to an incorrect voltage can result in electric shock and damage to the printer.
On power supplies with line voltage selector, make sure it is set to your local line voltage.
2.Caution • Never hot connect the 24V cable. This will cause damage to the printer electronics or the power supply.
Connect the cable from the power supply to the power connector on the back of the printer.
3.Connect the power cable to the line outlet.
4.Turn ON the power.
Table 1 • Current Consumption
Mode | 80 – 82.5 mm paper width | ||
|
|
| |
Idle | 150 mA | 150 mA | |
|
|
|
|
Standard text printing | 2 | A average | 3 A average |
|
|
|
|
All black printing | 6 | A | 8.5 A |
|
|
|
|
09/14/2009 | TTP 2000 Technical Manual |