Default Parameter Settings |
| 95 |
| ||
Print Setup |
|
|
52 | 0 | Default | Warning Level |
0 | Min | ||
| 255 | Max |
|
Turns on/off indication of Paper near end level on the status indicator. This affects only the status indicator, not the status enquiries
|
|
|
| < | |
|
|
|
|
|
|
|
|
| ESC>&P<52><0> |
| No indication |
|
|
| <ESC>&P<52><1> |
| Paper Near End indication |
| 0 | Default |
|
|
|
53 |
| Lock Parameters | |||
0 | Min |
| |||
| 1 | Max |
|
|
|
You can lock the parameters so that they cannot be changed by the <ESC>&P command.
|
|
| <ESC>&P<53><0> |
| Unlocked |
|
|
| <ESC>&P<53><1> |
| Locked |
| 255 | Default |
|
|
|
56 |
| Max Status Code | |||
0 | Min |
| |||
| 255 | Max |
|
|
|
This will control the highest status code that is reported by <ESC><ENQ><6> and <ESC><ENQ><1>
Example •
If you want the TTP 2000 to be compatible with software written for TTP 1020, set parameter 56 to 6h and error codes 7 and up will not be reported.
09/14/2009 | TTP 2000 Technical Manual |