86Default Parameter Settings Print Setup
9 | 15 | Default | Presenter Loop Length |
3 | Min | ||
| 255 | Max |
|
Limits the maximum loop length. When the set length is reached, the printer ejects part of the printout and continues to print. You use this when you have very limited space for the loop inside the kiosk. Each step represents a
Setting the parameter to 0 disables the looping and feeds the paper straight out.
|
|
|
| <ESC>&P<9><0> |
| Disable the loop |
|
|
|
|
| <ESC>&P<9><5> |
| 16 cm loop |
|
|
|
|
| <ESC>&P<9><15> |
| 48 cm loop |
|
| 3 | Default |
|
|
|
| |
10 |
| Print Head Pulse Control | |||||
3 | Min |
| |||||
| 7 | Max |
|
|
|
| |
|
|
| Controls how the print head burns the pixels. | ||||
|
|
|
|
| ; |
| |
|
|
|
|
|
|
| |
|
|
|
| <ESC>&P<10><3> |
| 2 burn pulses |
|
|
|
|
| <ESC>&P<10><7> |
| 4 burn pulses |
|
|
|
|
|
| |||
|
|
| Caution • 3 and 7 are the only allowed settings, do not set anything else! | ||||
| 0 | Default |
|
|
|
| |
|
|
|
|
|
| ||
13 |
| Line Spacing |
| ||||
0 | Min |
|
|
| |||
| 30 | Max |
|
|
|
|
|
The line spacing is normally set by the font height. With this parameter you can set a line spacing that is higher that the font height. Line spacing settings lower than the font height will be ignored.
|
|
| <ESC>&P<13><30> |
| 30 pixels or font height, whichever is the |
|
|
|
|
| largest |
| 0 | Default |
|
|
|
|
|
|
| ||
14 |
| Font Selection | |||
0 | Min |
| |||
| 7 | Max |
|
|
|
Store which font number is used if no font is specified. Font is selected using the "Select Font
"command <ESC>!<n>. Selecting an invalid font gives a software error status message (invalid index).
TTP 2000 Technical Manual | 09/14/2009 |