Default Parameter Settings 83
Summary of Parameter Settings
3 | 0 | Default |
0 | Min | |
| 2 | Max |
| Parity | |
|
| |
Select what parity to use on the serial interface. | ||
|
|
|
<ESC>&P<3><0> |
| No parity |
<ESC>&P<3><1> |
| Odd parity |
<ESC>&P<3><2> |
| Even parity |
4 | 2 | Default | |
0 | Min | ||
| 2 | Max |
|
Select what handshaking to use on the serial interface.
<ESC>&P<4><0> | No flow control |
<ESC>&P<4><1> | Xon / Xoff |
<ESC>&P<4><2> | Hardware |
Important • DO NOT USE Xon/Xoff if you send any type of binary data like graphics data, status requests etc. Xon / Xoff only works when plain text is sent unidirectional to the printer. Graphics and status replies may well contain the Xon (11 hex) and Xoff (13 hex) characters and will obstruct the communication.
09/14/2009 | TTP 2000 Technical Manual |